Filling your Kanger Mini Protank3 with THC e-Juice

Filling your Kanger Mini Protank3 with THC e-Juice

Oranje Pharma Cannabis Concentrates Thanks you for your Purchase

For all you new vapers out there that are just starting to use Mini Protank3 here’s how to fill them….

Filling your Kanger Mini Protank3 with THC e-Juice:

Unscrew the base of the Mini Protank3

Unscrew the base of the Mini Protank3

1.  Separate the battery from the Mini Protank3 base, then hold the mini ProTank3 upside down, mouthpiece downwards and unscrew the coil base from the tank body.
2.  Lift the Coil base away from the body of the clearomizer and set aside. (*see ‘Tips’ below)

Filling The Mini Protank3 With THC E-Liquid

Filling The Mini Protank3 With THC E-Liquid

3.  Hold the Mini Protank3 at an angle and aim the nozzle of the THC e-liquid bottle into the side of the opened tank.
4.  Ensure the THC E-liquid is not fed toward or into the central pillar which is hollow and leads to the mouthpiece.
5.  Fill to just under capacity, below the center pillar or leaking into mouth piece will occur.

Reassemble the Mini Protank3 Base with Coil

Reassemble the Mini Protank3 Base with Coil

6.  Replace base and screw securely into place. Finger tight is sufficient.
7.  Replace cap onto THC E-liquid bottle.
8.  Wipe over the device with tissue to remove any THC eliquid residue.
9.  Wipe any THC E-liquid spills.

 

10.  Using a tissue, clean the base cavity of the clearomizer to remove any THC E-liquid residue from the threads and contact points.
11.  Using a tissue, clean the cavity in the top of your battery, also wipe over all battery threads.
12.  Recharge battery or replace onto the clearomizer.
13.  Please store your THC E-liquid safely out of reach of children and pets.

Tips

•  Cleaning your battery before charging will prevent THC E-Liquid residue from being transferred to the charging lead and ensure proper contact is made during charging.
•  When refilling you may wish to wipe and clean the threads both inside of the clearomizer when the base has been removed and of the base to keep the threads clean and clear of THC E-liquid residue.
•  99% Isopropyl alcohol can be used on a paper towel or Q-Tip to more thoroughly clean the battery threads and electrical contacts.


How To change the coil:

Unscrew the base of the Mini Protank3

Unscrew the base of the Mini Protank3

1.  Unscrew the Clearomizer from the battery.
2.  With mouthpiece downwards unscrew and remove base which houses the coil.

kanger mini protank3 dual-coil Replacement

kanger mini protank3 dual-coil Replacement

3.  Set aside the clearomizer tank part ensuring that it is held safely with mouthpiece downwards so that you do not lose any THC E-Liquid that is in the tank.

Mini Protank3 Replacement Coil

Mini Protank3 Replacement Coil

4.  Unscrew the used coil from the base and replace with a new Mini Protank3 Replacement Coil. Tighten into place finger tight is sufficient.
5.  Reassemble and Enjoy Discreetly…..


We offer speedy delivery service via Canada Post’s Xpresspost to the following areas as well as small towns.

Click on the town or city nearest to you and learn how to save 20% on every order:

Alberta | BC | Calgary | Edmonton | Fort McMurrayGatineauHalifax | Hamilton | Kitchener | London | Manitoba Montreal | Niagara Region | Nanaimo | New BrunswickNorth Bay | Nova Scotia | OttawaOntarioPEI | Peterborough | Regina | QuebecSaskatchewan | SurreySaskatoon | St. John’s | Thunder Bay | Toronto | Vancouver | Victoria | Windsor | Winnipeg | Whistler